完达山区旋卷构造与找矿意义     

刘发文  梁树昌 《中国煤炭地质》2014,(12):81-88

完达山区旋卷构造位于黑龙江省东部,发育于完达山优地槽褶皱带内,构成饶河复背斜。该复背斜总体呈近南北向,略向西突出的弧形逆掩推覆于宝清过渡带。用旋卷构造＂三大特征＂对比,一系列弧形褶皱和断裂向北东方向收敛,向南东方向撒开,围绕以蛤蟆河岩体为中心旋扭,内旋面向撒开方向、外旋面向收敛方向旋扭,具压性—压扭性特征。这一旋卷构造是由富锦——小佳河断裂的剪切牵引为主、敦密深大断裂的左旋走滑剪切为辅的联合作用形成的。根据旋扭构造的发育情况大体划分了三个旋扭层。目前已知的铜金矿（点）床主要分布于各旋扭层的撒开段,但收敛段找矿潜力较大,其次为各旋扭层界面和向西弧形突出部位也具一定的找矿潜力。  相似文献   

一种基于GTP的复杂地质体真3维     

车德福吴立新  殷作如 《地理信息世界》2008,6(1):34-38,45

在总结分析现有复杂断层及倒转褶皱3维建模方法的基础上，提出一种基于广义三棱柱（GTP）的3维交互建模方法（岩柱体分区RPBP建模法）。文中定义了岩柱体、界限三角形两个重要概念，RPBP法可以通过构建断层界限三角形，将复杂断层系转化为多个简单断层系，然后采用构建简单断层系模型的方法来实现复杂断层系的3维建模；而对于倒转褶皱，RPBP法则通过构建褶皱轴界限三角形避免数据局部重复和冲突，使GTP建模过程得以顺利进行。实验表明，该方法能便捷可靠地实现含多断层相互切割、倒转褶皱等复杂地质体的真3维建模。  相似文献   

缓倾角塔柱状危岩压裂损伤-突变失稳预测     

周福川  唐红梅  王林峰 《岩土力学》2022,43(5):1341-1352

陡高边坡灰岩地区缓倾角塔柱状危岩常具有底部压裂诱发整体失稳破坏模式,其损伤-突变失稳机制属于山地灾害关键科学问题之一。以重庆南川区甑子岩W12#危岩崩塌为例,建立了荷载、水致弱化效应耦合下的损伤突变地质力学模型,获得了基于应变等价原理的损伤本构方程及总损伤度演化方程,并将水致弱化函数改进为软化系数的一元三次函数。将地质力学模型概化为等效弹簧模型,通过能量平衡原理建立损伤-折叠突变模型,获得了塔柱状危岩系统压裂失稳判据及临界突变位移特征值表达式。计算表明：W12#危岩压裂失稳时,该系统的控制变量为–0.003 251,小于0,表示该系统进入不稳定状态;计算理论突变位移起始值148.70 mm比实测位移第一拐点值154.34 mm偏小,相对误差约3.65%,偏于安全;理论损伤本构曲线、理论损伤演化曲线与现有文献数值模拟结果趋于一致,所构建的理论预测模型具有较好的适用性。其研究成果可用于预判塔柱状危岩压裂失稳损伤演化过程及突发失稳特征位移值,为灰岩区陡高边坡危岩崩塌监测预警和防灾减灾提供理论依据。  相似文献   

Paleostress Reconstruction of Micangshan Anticlinorium on the Southern Margin of the Qinling Orogenic Belts, China     

LI Jinxi  LI Zhiwu  LIU Shugen  SUN Dong  DENG Bin 《《地质学报》英文版》2015,89(2):505-518

Brittle structures in rock of different ages can be used to establish the tectonic evolution of an orogenic belt through paleostress calculations. Micangshan is located at the southern margin of the Qinling orogenic belt,between the SE-trending Longmenshan fold-and-thrust belt and the arcuate Dabashan thrust-and-fold belt. Structural observations revealed that the dominant structures are reverse and strike-slip faults and folds with E–W and NE–SE trends. To increase knowledge of the tectonic evolution of the Micangshan anticlinorium,faults,joints,veins,and folds were measured at more than eighty sites. On the basis of structural analysis,it emerged that the multiphase paleostress fields became established after the oblique collision between the North and South China plates. The earliest stress field with N–S compression was established during the Micangshan uplift associated with the E–W trending faults and folds. Subsequently,a N–S extension occurred when the Qinling orogenic belt collapsed. Then NW–SE compression developed,with NE trending faults and folds forming in relation to Longmenshan thrusting toward southwest on the eastern margin of the Tibetan plateau. With the development of the arcuate Dabashan orogenic belt,the compression stress orientation of the Micangshan anticlinorium altered from NE–SW to E–W.  相似文献   

扬子板块北缘中段多期褶皱构造的变形特征及叠加关系   总被引：1，自引：0，他引：1  

王凯  刘少峰  姜承鑫  王平  张岩  孟勇 《大地构造与成矿学》2015,(2)

扬子板块北缘在中生代期间经历多期构造变形,早期形成的构造样式多被后期的构造变形改造破坏,仅在大巴山弧形断裂和大洪山弧形带之间的南漳一带较好地保存了早期的构造变形样式。笔者通过对当阳复向斜北段发育的褶皱构造的构造要素测量统计和褶皱叠加关系的解析,在扬子板块北缘中段南漳一带识别出三期走向不同的褶皱叠加构造,按发育早晚顺序分别为NW-SE走向褶皱、NE-SW走向褶皱和近EW走向褶皱,分别对应扬子板块向北俯冲以及后期转入陆内变形、江南–雪峰褶皱逆冲带向NW逆冲推覆和晚侏罗世到早白垩世期间大巴山向SW推进等构造变形过程。  相似文献   

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism     

Yujiro Ogawa  Ryota Mori  Toshiaki Tsunogae  Yildirim Dilek  Ron Harris 《International Geology Review》2015,57(5-8):824-842

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.  相似文献   

Tectonic control of accommodation space and sediment supply within the Mata Amarilla Formation (lower Upper Cretaceous) Patagonia,Argentina          下载免费PDF全文

Augusto N. Varela 《Sedimentology》2015,62(3):867-896

The Mata Amarilla Formation dates from the early Upper Cretaceous and was deposited during a transition in tectonic regime from the extensional Rocas Verdes Basin to the Austral Foreland Basin. Detailed sedimentological logs and architectural parameters were used to define 13 facies associations. The distribution of facies associations and associated variations in fluvial architecture have enabled large‐scale changes in accommodation space/sediment supply ratios (A/S ratio) to be defined for the three component sections of the Mata Amarilla Formation. The lower and upper sections are characterized by a high A/S ratio, whereas the middle section corresponds to a low A/S ratio. In the western part of the study area, small‐scale variations in the A/S ratio were recognized in the middle section. The strong west to east trend in evolution of the fluvial systems coincides with the direction of propagation of the Patagonian fold and thrust belt, which is located to the west of the study area. Intervals of high A/S ratio (i.e. lower and upper sections) are interpreted to have developed during periods of increased loading by the fold and thrust belt caused by tectonic uplift. In contrast, intervals of low A/S ratio (i.e. middle section) were developed during periods of tectonic quiescence. This article suggests that the large‐scale variations in A/S ratios are related to different rates of migration and growth of the Patagonian fold and thrust belt, whereas the small‐scale variation occurred in response to specific periods of thrusting and folding in the Patagonian fold and thrust belt (i.e. local loads). This field example of the effects of different scales of variation in A/S ratios across the Austral Foreland Basin could be used to recognize similar tectonically forced variations in stratigraphic architecture in other foreland basins throughout the world, as well as to understand the response of fluvial systems to such changes.  相似文献   

Displacement transfer from fault-bend to fault-propagation fold geometry: An example from the Himalayan thrust front     

《Journal of Structural Geology》2015

The leading edge of the ENE-trending Himalayan thrust front in Pakistan exhibits along-strike changes in deformational style, ranging from fault-bend to fault-propagation folds. Although the structural geometry is very gently deformed throughout the Salt Range, it becomes progressively more complex to the east as the leading edge of the emergent Salt Range Thrust becomes blind. Surface geology, seismic reflection, petroleum well, and chronostratigraphic data are synthesized to produce a 3-D kinematic model that reconciles the contrasting structural geometries along this part of the Himalayan thrust front. We propose a model whereby displacement was transferred, across a newly-identified lateral ramp, from a fault-bend fold in the west to fault-propagation folds in the east and comparable shortening was synchronously accommodated by two fundamentally different mechanisms: translation vs. telescoping. However, substantially different shortening distribution patterns within these structurally contrasting segments require a tear fault, which later is reactivated as a thrust fault. The present geometry of this S-shaped displacement transfer zone is a combined result of the NW–SE compression of the lateral culmination wall and associated tear fault, and their subsequent modification due to mobilization of underlying ductile salt.  相似文献   

基于克里格法刻画砂岩型铀矿U、Ra和U-Ra平衡系数垂向分布规律——以二连盆地芒来铀矿床为例          下载免费PDF全文

王伟 《地质与勘探》2024,60(2):236-243

砂岩型铀矿是绿色经济可采的重要能源矿种,目前是世界上重要的铀矿勘探类型之一。二连盆地芒来铀矿床、鄂尔多斯盆地纳岭沟铀矿床铀矿体多呈板状产出,板状铀矿体成因备受关注。为研究砂岩型铀矿内部U、Ra和铀镭平衡系数（Kp）分布的垂向分布规律,本文以二连盆地芒来铀矿床为例,采用具有网格精度高优点的克里格插值法研究U、Ra和Kp垂向分布规律,分别利用放射性样品分析数据和定量伽马测井五点式反褶积法反演U含量数据,通过克里格法精细刻画砂岩型矿体中U、Ra和Kp分布的垂向分布规律。研究发现,该矿床板状矿体内部具有卷状的特征,Kp分布形态可以用来判断含氧含铀水的运移方向以及氧化强弱。该方法对研究铀矿体形态、铀矿成矿规律和后续地浸开采具有重要意义。  相似文献   

地层剖面计算表的计算机自动处理     

胡贵昂  陆刚 《南方国土资源》2002,15(4):69-73

地层剖面计算表的计算机自动处理 ,涉及剖面是由老地层向新地层测制还是由新地层向老地层测制、褶皱的识别处理、存在回测时 (特别是在回测中又存在背向斜时 )的处理、测段厚度及分层厚度的计算等几个主要环节。文章引入剖面方向系数 η、测段方向系数κ、回测系数 ρ 3个新参数 ,建立了地层剖面计算表自动处理的数学模型 ,可以非常方便地将剖面图及其柱状图以矢量格式输出  相似文献